Panasonic SA-NC9GC Service Manual page 45

Item
Mode Name
Micro-processor Micro-processor firmware version
firmware version display & EEPROM checksum
display & display.
EEPROM EEPROM checksum is only available
checksum display. due to existence of EEPROM IC.
9.4.2. Service Mode Table 3
Item
Mode Name
Initialization Initialization.
User settings are cancelled and
player is initialized to factory setting.
It is necessary when after
replacement of micro-processor
(DV5.0 LSI) IC, Flash ROM IC,
EEPROM IC & HDMI Module P.C.B.
Region display Region code display, TV Broadcasting
system & the model no. information
Note: Refer to figure 2 for video
design information
Description
(Display 1)
(Display 2)
(Condition 1)
If the version of the EEPROM does not
match, [NG] is displayed.
(Condition 2)
(a) If there is NO EEPROM header string
OR
(b) If there is no EEPROM (no data is
received by micro-processor), [NO] is
displayed.
(Condition 3)
If the EEPROM version matches,
checksum [YYYY] is displayed.
(Display 3)
Description
FL Display
FL Display
45
SA-NC9GC / SA-NC9GS / SA-NC9GCS / SA-NC9GN
Key Operation
Front Key
In STOP (no disc) mode, press
[ ] button on the main unit,
and [7] button on the remote control
unit.
Cancelled automatically 5 seconds
later.
Key Operation
Front Key
In STOP (no disc) mode, press
[ ] button on the main unit,
and [ ] button on the remote
control unit.
Cancelled automatically 5 seconds
later.
In STOP (no disc) mode, press
[ ] button on the main unit,
and [6] button on the remote control
unit.
Cancelled automatically 5 seconds
later.