Panasonic SA-NC9GC Service Manual page 36

SA-NC9GC / SA-NC9GS / SA-NC9GCS / SA-NC9GN
Error Code Diagnosis Contents Description of error
H03 Traverse servo error The
H04 Tracking servo error
H05 Seek time out error
H07 Driver IC thermal
shut down
H15 Disc tray open
detection switch
failure
H16 Disc tray close
detection switch
failure
U11 Focus servo error
U15 Unfinalized DVD-R
F500 DSC error
F506 Invalid media
F620 OPU unit abnormality
temperature
F621 OPU unit circuitry
abnormal
U701 HDMI/DVI HDCP
non-compliance
U702 HDMI/DVI I2C
communication error
traverse is
abnormal. (Traverse
servo, DV 5.0 LSI IC
(IC8001), TRV motor
error.)
Tracking coil NG (OPU
unit abnormal), DV 5.0
LSI IC (IC8001) error.)
It is not possible to
access the disc.
TOC cannot read.
Abnormal disc etc.
Pickup abnormal or disc
is dirty.
(TRV motor error, DV
5.0 LSI IC (IC8001)
error.)
The spindle motor is
abnormal. (short
between brushes)
The disc tray cannot be
opened & it closes
spontaneously.
The disc tray cannot be
closed & it opens
spontaneously.
Focus coil, FE signal
error.
DV 5.0 LSI IC (IC8001)
stops in the occurance of
servo error (startup,
focus error, etc)
Disc is flipped over, TOC
unreadable,
incompatible disc.
Laser protection at high
tempurature.
Laser protection at
circuit failure.
It is generated for the
connection with
HDMI/DVI when the
equipment (TV set) does
not correspond to
HDCP. (HDCP:
Copyright protection
technology. Encryption
method of digital image
signal.)
The communication
error of I2C when
connecting it with
HDMI/DVI. For instance,
when EDID information
to which information on
the TV set side has been
described cannot be
read, it is generated.
Automatic FL Display
36
Remarks
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
(Unfinalized DVD-R is likely to become
U11.)
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.