Panasonic SA-NC9GC Service Manual page 30

SA-NC9GC / SA-NC9GS / SA-NC9GCS / SA-NC9GN
Mode Name
CD laser drive CD laser drive current measurement.
current CD laser drive current is measured
measurement and the result is displayed together
with the initial value stored in the
EEPROM IC.
After the measurement, CD laser
emission is kept on. It is turned off
when POWER key is switched off.
FL Display sequence
Display 1 → 2
Item
Description
FL Display
(Display 1)
The value denotes the current in decimal
notation.
(Display 2)
The above example shows the initial current
is 0XXmA and the measured value is
0YYmA.
30
Key Operation
Front Key
In STOP (no disc) mode, press
[ ] button on the main unit,
and [3] button on the remote control
unit.
Cancelled automatically 5 seconds
later.