Table of Contents
Advertisement
SA-NC9GC / SA-NC9GS / SA-NC9GCS / SA-NC9GN
Mode Name
Timer 1 check
Timer 1 check.
Laser operation time is measured
separately for DVD laser and CD
laser.
Timer 1 reset
Timer 1 reset.
Laser operation timer of both DVD
laser and CD laser is reset all at
once.
Timer 2 check
Timer 2 check.
Spindle motor operation timer.
Timer 2 reset
Timer 2 reset.
Spindle motor operation timer.
9.4.4.
Error Code Table Display
· The mechanism unit is equipped with fail-safe protection for the [OPEN/CLOSE], [TURN] & [UP/DOWN] operations. When it
detects any abnormalities, the fail-safe protection will be performed with an error code being memorized & the power supply
[OFF] will be carried out.
Below is the error code display:-
OPEN/CLOSE
UP/DOWN
TURN
TOC READ
FOCUS
TURN
Item
Description
Mecha operation
The OPEN eror under clamp rise
The OPEN error under clamp down
The CLOSE error under clamp rise
The CLOSE error under clamp down
UP error
DOWN error
Right rotation error
Reverse rotation error
TOC READ error
Timeout error
The right rotation direction stop position error
The reverse rotation direction stop position error H0111
FL Display
(Display 1)
Shown to the above is DVD laser
usage time, and to the below is CD
laser usage time.
Time is shown in 5 digits of decimal
notation in a unit of 10 hours.
"00000" will follow "99999". (DVD
laser)
(Display 2)
Time is shown in 6 digits of decimal
notation in a unit of 10 hours.
"000000" will follow "99999". (CD
laser)
Time is shown in 5 digits of decimal
notation in a unit of 10 hours.
It will clear to "00000" upon reset.
Time is shown in 5 digits of decimal
notation in a unit of 1 hour.
"00000" will follow "99999".
Time is shown in 5 digits of decimal
notation in a unit of 1 hour.
It will be cleared to "00000" upon
activating this.
The kind of error
48
Key Operation
Front Key
In
STOP
(no
disc)
[
] button on the main unit, and
[
] button on the remote control unit.
Cancelled automatically 5 seconds later.
Press "FL Display" button for next page of
FL Display.
While
display
Timer
1
[
] button on the main unit, and
[
] button on the remote control unit.
Cancelled automatically 5 seconds later.
In
STOP
(no
disc)
[
] button on the main unit, and
[
] button on the remote control unit.
Cancelled automatically 5 seconds later.
While
display
Timer
2
[
] button on the main unit, and
[
] button on the remote control unit.
Cancelled automatically 5 seconds later.
FL Display
H010
H011
H012
H013
H014
H015
H016
H017
H018
H019
H0110
mode,
press
data,
press
mode,
press
data,
press
Advertisement
Table of Contents
