Pro-Form PFEVEL73908.0 User Manual page 8

5. The Console (23) can use four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents. Remove the battery cover, insert the bat-
teries into the battery compartment, and reat-
tach the battery cover. Make sure to orient the
batteries as shown by the diagram inside
the battery compartment.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the front
cover of this manual. To avoid damaging the
console, use only a manufacturer-supplied
AC adapter. Plug one end of the AC adapter
into the jack on the console; plug the other end
into an outlet installed in accordance with all
local codes and ordinances.
6. While another person holds the Console (23)
near the Upright Extension (73), connect the
console wire harness to the Extension Wire
Harness (44).
Insert the excess wire into the Upright
Extension (73).
Tip: Avoid pinching the wires. Attach the
Console (23) to the Upright Extension (73) with
four M4 x 16mm Screws (52).
5
6
23
Console Wire
Harness
52
8
Batteries
Battery
Cover
23
44
73
Avoid pinching
the wires