Table of Contents
Advertisement
1-1. Installation Procedure
Installation procedure of this unit is shown on the following flowchart.
Refer to each section about detail of each flow.
The operation manual is also reqruired to do *-marked flow.
Start
Determination of
installation place
Unpacking
n
When the unit is transported, it is required to pack the unit into the specified new packing materials.
Do not reuse the packing materials.
Installation
*Connection
*Initial setup
*Operation check
End
1-2. Supplied Accessories
Cap, BNC ........................................................................ 11
Cap, DC OUT .................................................................... 2
Cap, XLR (F) ..................................................................... 2
Cap, XLR (M) ................................................................... 5
Cap, DUST ........................................................................ 1
Operation manual .............................................................. 1
Installation manual ............................................................ 1
n
After installation, be sure to use the supplied cap for protecting unused connector.
DNW-A28
DNW-A28P
Section 1
Installation
1-3. Operating Conditions
1-4. Power Supply
1-5. Installation Space
1-6. Connectors / Cables
1-7. Signal Inputs and Outputs
1-8. Setup Extended Menu
1-9. Settings for External Editors
1-1
Advertisement
Table of Contents
