1-1. Installation Procedure
Installation procedure of this unit is shown on the follow-
ing flowchart.
Refer to each section about detail of each flow.
The operation manual is also reqruired to do * - marked
items.
Start
Determination of
installation place
Unpacking
n
When the unit is transported, it is required to pack the unit into the specified packing materials.
Rack mounting
*Connection
*Initial setup
*Operation check
n
If an error message is shown on the time counter, refer to "3-1. Error Message".
End
DNW-A30/A30P
DNW-30/30P
Section 1
Installation
1-3. Operating Conditions
1-4. Power Supply
1-5. Installation Space
1-6. Rack Mounting
1-7. Connecting Connectors and Cables
1-8. Signal Inputs and Outputs
1-9. Switch Settings on Connector Panel
1-10. Switch and Shorting Plug Setting on PC Boards
1-11. Mode Switching of Search Dial
1-12. Setup Menu Items
1-13. Reference System
1-14. Switching between 525/625 Line Systems
1-15. Settings and Adjustment when Peripheral Equipment is Connected
1-2. Supplied Accessories
9 pins remote control cable (RCC-5G) .............................. 1
Screws for rack mounting (PSW 4 x 16) .......................... 4
Operation manual .............................................................. 1
Maintenance manual (Part 1) ............................................. 1
1-1