Setting Device Limits; Reset To Zero; Production Test Menu - Nautilus Be Strong Commerical T912 Service Manual

SECTION 2: CONSOLE CODES
Parameter Menu / Configure System - Sets the device limits.
Table 2–3. Setting Device Limits
Step No. Press Keys on Console
1 ENTER and STOP for 3 secs
2 INCLINE UP OR INCLINE DOWN
3 QUICKSTART
4 INCLINE UP OR INCLINE DOWN
5 SPEED UP OR SPEED DOWN
6 QUICKSTART
Reset Total Hours and Miles to Zero - Initiate only when Total Hours or Total Distance is displayed.
Table 2–4. Reset to Zero
Step No. Press Keys on Console
1 SPEED UP
2 SPEED UP
3 QUICKSTART
4 QUICKSTART
5 SPEED UP
6 SPEED UP

Production Test Menu -

Table 2–5. Production Test Menu
Step No. Press Keys on Console
1 ENTER and STOP for 3 secs
2 INCLINE UP or DOWN
3 QUICKSTART
4
18
Display (What you will see)
CAL
Scroll to ConF selection
Enters ConF selection setup
Scrolls between parameters: Maximum Speed, Maximum
Incline, Maximum User Weight, Units: English or Metric, Roller
Diameter (leave default value in place).
Selects desired value
Enters value
Display (What you will see)
Units reset to "0"
Display (What you will see)
CAL
Scroll to Prod selection
Enters Prod selection setup
Begins automatic testing on: RAM Test, ROM Test, and
NVRAM Test. Displays results of PASS, Err1 (RAM Failure),
Err2 (ROM Failure) or Err4 (NVRAM failure).
Software Version in Dist/Cal display window and security data
(Checksum) in Time/Pace display window.
Display Test