Auto Trace Setup - JVC LWT0254-001B-H Instructions Manual

Setting Up the Camera Using RM-P2580 (continued)
40
EN

AUTO TRACE Setup

MENU button AUTO PAN button
SET button
CAMERA button
CAMERA POSITION
SETUP
POWER
ALARM
MENU SET
KEY LOCK
LENS CAMERA/POSITION
1 2 3
CAMERA
SPEED
4 5 6
IRIS OPTION
CLOSE OPEN
1
FOCUS
7 8 9
AUTO
NEAR FAR
AF
PAN
0
ZOOM TELE CLEAR ENTER
WIDE
/HOME
Numeric
ENTER
keys
button
ZOOM button
FOCUS button
MENU
CAM.FUNCTION1..
CAM.FUNCTION2..
CAM.TITLE/ALARM..
CAM.ALC/VIDEO..
AUTO PAN/PATROL/TRACE..
POS.FUNCTION SET..
FACTORY SETTINGS..
< > < >
MENU EXIT SET SUB MENU
MENU Screen
AUTO PAN / PATROL / TRACE
AUTO PAN SET..
AUTO PATROL SET..
AUTO TRACE SET..
AUTO PAN / TRACE VIDEO ..
RM . A . PAN KEY
RM . A . PATROL KEY
< > < >
MENU RETURN SET
AUTO PAN/PATROL/TRACE Screen
AUTO TRACE SET Screen
AUTO TRACE SET
SET START POSITION
LEARNING REMAINDER T : ∗ ∗ s
< > < >
MENU RETURN SET
AUTO TRACE SET Screen
Use the AUTO TRACE screen to set the Auto Trace function,
which stores and reproduces the actions of a manual camera
PAN lever
operation (up to 30 seconds).
RM-P2580
REMOTE CONTROL UNIT
AUTO F-1 F-2 F-3
PAN/TILT
POSI-
TION
OPTION
2
AUTO
PATROL
AUTO
PATROL
button
A . PAN
A . PATROL
SUB MENU
● Saving of auto operations will not be possible when this menu is displayed.
● Manual Pan Limit remains valid when this menu is displayed.
● Manual Pan Limit can be set upon exiting this menu without affecting the Auto
Trace operation.
● Auto Trace allows easy recording of manual operations, but positions may not be
accurately reproduced during playback.
To Start Auto Trace Function
To let the camera execute reproduction of the Auto Trace operation, it is
required to set the Auto Trace function in the AUTO PAN button or AUTO
PATROL button of the RM-P2580.
A RM. A. PAN KEY (A pg. 29) and RM. A. PATROL KEY (A pg. 29).
When the button to which the Auto Trace function is set is pressed, the
lamp in the button lights up and Auto Trace reproduction starts.
The Auto Trace reproduction will repeat continually with a pause of 30
seconds between each operation.
To end the Auto Trace reproduction, press the button to which the Auto
Trace function is set again so that the lamp in the button turns off.
END
Select the camera. (A RM-P2580 INSTRUCTIONS )
CAMERA buttonNNumeric key (Camera Number) NENTER button
●The picture of the selected camera is output.
Display the MENU screen. (A pg. 21, steps
MENU button (3 sec.) N Select CAMERA.. using the PAN lever NSET
button.
●The MENU screen will be displayed.
Tilt the PAN lever up or down to move the cursor (E) to
AUTO PAN/PATROL/TRACE.. and press the SET button.
●The AUTO PAN/PATROL/TRACE screen is displayed.
Move the cursor (E) to AUTO TRACE SET.. and press the
SET button.
●The AUTO TRACE SET screen is displayed.
Set the patrol start position.
Using the PAN lever and the ZOOM button and FOCUS button, set the
camera position at which the Auto Trace function is to be started.
Press the SET button (to start memorization of manual
camera operations).
●Auto Trace starts. Operate the camera using the PAN lever, and the
ZOOM button and FOCUS button.
●The Auto Trace function can memorize camera operations for up to 30
seconds, during this period LEARNING REMAINDER T: **s is
displayed in the screen.
●Storage finishes automatically after 30 seconds.
●Perform step
only when finishing the storage but before 30 seconds
elapses.
●Recording time may shorten depending on details of the operation.
(Shortest recording duration is approximately 10 seconds)
Press the SET button to end the memorization of manual
camera operations.
●This ends recording of Auto Trace and a message indicating DATA
SAVED will be displayed.
Press the MENU button.
●The screen returns to the AUTO PAN/PATROL/TRACE menu.
to )