Table of Contents
Advertisement
Setting Up the Camera Using RM-P2580 (continued)
32
EN
MANUAL PAN LIMIT Setup
MENU button
SET button
CAMERA button
CAMERA
POSITION
SETUP
POWER
ALARM
MENU
SET
KEY LOCK
LENS
CAMERA/POSITION
1
2
3
CAMERA
SPEED
4
5
6
IRIS
OPTION
CLOSE
OPEN
1
FOCUS
7
8
9
AUTO
NEAR
FAR
AF
PAN
0
ZOOM
TELE
CLEAR
ENTER
WIDE
/HOME
Numeric
keys
CAMERA FUNCTION2
FLIP
VAR. P / T SPEED
EASY AF
AF FOR IR
TILT LIMIT
M. PAN LIMIT..
AUTO RETURN..
<
>
<
>
MENU
RETURN
SET
CAMERA FUNCTION 2 Screen
M. PAN LIMIT POS.SET
[ L ]POS.SETTING →
<
>
SET
INVALID
DURING PAN MOVEMENT
<
>
<
>
MENU
RETURN
SET
M. PAN LIMIT POS.SET Screen (Left Limit)
M. PAN LIMIT POS.SET
← [ R ]POS.SETTING
<
>
SET
INVALID
DURING PAN MOVEMENT
<
>
<
>
MENU
RETURN
SET
M. PAN LIMIT POS.SET Screen (Right Limit)
This section describes procedures for setting the Panning
(horizontal) range during manual operation.
PAN lever
RM-P2580
REMOTE CONTROL UNIT
AUTO
F-1
F-2
F-3
PAN/TILT
POSI-
TION
OPTION
2
AUTO
PATROL
ENTER
button
OFF
ON
OFF
OFF
ON
SUB MENU
● Tilting , zooming and focusing operations are possible when this menu is displayed.
● If a pan limit has already been set, the camera will move to the left pan limit position
when this menu is invoked.
● Setting cannot be performed when Panning is in progress. Press the SET button
after Panning has come to a stop.
● Auto Flip operation will override this setting if the destination position of Auto Flip is
L / R
outside the range as set in this item.
● Manual Pan Limit remains valid when setting preset positions.
● Movement to preset positions will be performed without regard to the Manual Pan Limit.
● The M. PAN LIMIT.. item will not affect the following even when it is set to ON .
• PRIVATE MASK Settings
• AUTO PAN POSITION Settings
• AREA DISPLAY Settings
L / R
Select a camera. (ARM-P2580 INSTRUCTIONS )
CAMERA buttonNNumeric key (Camera Number)NENTER button
●Video images of the selected camera will be output.
MENU screen display. (A pg. 21, steps
MENU button (3 sec.) N Select CAMERA.. using the PAN lever N
SET button.
●The MENU screen will be displayed.
Move the PAN lever upward/downward to shift the cursor (E)
to the CAM. FUNCTION 2.. item, followed by pressing the
SET button.
●The CAMERA FUNCTION 2 screen will be displayed.
Shift the cursor (E) to the M. PAN LIMIT.. item, and move
the PAN lever leftward/rightward to select ON .
Press the SET button.
●The M. PAN LIMIT POS.SET screen (left limit) will be displayed.
Set the position for the left limit.
Use the PAN lever to determine the position for the left limit.
●During setting, a message indicating [L] POS. SETTING N will be
displayed at the bottom left of the screen.
Press the SET button.
●The screen will switch to the right limit setting screen.
Set the position for the right limit.
Use the PAN lever to determine the position for the right limit.
●During setting, a message indicating O [R] POS. SETTING will be
displayed at the bottom right of the screen.
Press the MENU button.
●This stores the limit positions that have been set and returns the
screen to the CAMERA FUNCTION 2 menu.
to )
Advertisement
Table of Contents
