Table of Contents
Advertisement
Setting Up the Camera Using RM-P2580 (continued)
30
EN
POS. FUNCTION SET Screen (continued)
Item
AVERAGE : PEAK
For setting the method of exposure detection according to the ratio between the average and
peak values.
●Larger AVERAGE Value : Use this setting when areas other than those highlighted are
●Larger PEAK Value
[Set values: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5]
BLC MODE
For setting the backlight compensation function. Use this setting when an object appears dark
using the Auto Iris function due to the presence of a bright light source behind the object. Set in
such a way that unnecessary light sources are placed outside the photometry area.
OFF
AREA 1 to AREA 4 : Set according to the diagram below.
W. BALANCE
For setting the white balance adjustment feature. White balance can be adjusted for lighting
conditions within a color temperature range of 2,300 K to 10,000 K.
ATW
AWC : Switches to the Auto White Control mode and a message indicating <SET> AWC
R GAIN
Adjusts the hue of R (red) when in the AWC mode.
Increase value to enhance the red color.
[Set values: 0 to 255]
B GAIN
Adjusts the hue of B (blue) when in the AWC mode.
Increase value to enhance the blue color.
[Set values: 0 to 255]
FACTORY SETTINGS Screen
Use this screen to restore the values set in the menu to their factory settings.
Item
CANCEL
Do not restore to factory settings. Press the MENU button or the SET button to return to the
menu screen.
CLEAR
Restore factory settings. Upon pressing the SET button, a message indicating FACTORY
(W/O POS. TITLE)
SETTINGS... will be displayed for approximately 20 seconds, upon which the set values will
be restored to their factory settings. Upon completion, a message indicating
CLEARED will appear.
Preset positions as well as settings and titles for each position, however, will not be restored
to their initial values. Returns to the menu screen upon completion.
CLEAR (ALL)
Upon pressing the SET button, a message indicating FACTORY SETTINGS... will be
displayed for approximately 20 seconds, upon which the set values will be restored to their
factory settings. Upon completion, a message indicating DATA CLEARED will appear.
All settings including the titles and preset positions will be restored to their initial values.
Returns to the menu screen upon completion.
dark and unclear. (Example: 10:0)
: Use this setting when halation is seen to occur at the
highlighted areas on the screen. (Example: 5:5)
: Do not perform backlight compensation.
Photometry Area
Photometry
Area
OFF
AREA 1
: Auto-Tracking White Balance mode. Adjusts the white balance automatically according
to the color temperature of the lighting. During ATW setting, the R GAIN and B
GAIN items are displayed as "- - -" and hue adjustment is not possible.
EXEC will be displayed. Press the SET button to enable the AWC function for white
balance adjustment.
Function/Set Value
Photometry Area
Photometry
測光エリア
AREA 2
AREA 3
Function/Set Value
Photometry
測光エリア
AREA 4
DATA
Initial
Value
8:2
OFF
ATW
^
^
Initial
Value
^
Advertisement
Table of Contents
