Table of Contents
Advertisement
Connections & Installation (continued)
Installing the Ceiling Mount
CAUTIONS
● Attachment of a recessed cover in the ceiling (recess bracket)
may be mandatory in certain regions. If this is so, ensure that
the recessed cover (recess bracket) is securely attached before
installing the camera.
● Please refer to the instruction manual of the cover in use for
details on installation of the recessed cover (recess bracket).
● For more detail, please contact the JVC dealers.
Embedded Cover Ceiling (recess bracket)
Attach the Safety Wire
Connect the ceiling slab or channel to the ceiling mount
using a safety wire to prevent the camera from falling down.
Make use of the Safety Wire Mounting Hole to connect the
ceiling mount and the wire. (Refer to diagram below.)
Ceiling Mount
CAUTION
Choose a wire and ceiling structure with an appropriate
length and strength that may prevent danger in case the
camera falls down.
● Connect the wire in such a way that it can be insulated from the
ceiling structure. If the ceiling structure is made of a metallic
material, improper insulation with the camera may cause noise
interference in the images.
● Safety wires are not provided. Please purchase commercially
available wires separately.
Ceiling
Attach to Ceiling
Slab or Channel
Safety Wire
Safety Wire
Mounting Hole
Fasten the ceiling mount to the ceiling
Align the DFRONT mark to the front direction that the
camera is facing, and fasten the ceiling mount to the ceiling
using the 4 screws while paying attention not to catch the
connection cables.
Use M4-sized (No 8) screws or bolts. For woodscrews,
make use of those with a diameter of 4.1 mm.
DFRONT
Mark
Direction camera
is facing
Screws
● Be sure to use 4 screws and attach them firmly.
● The sheet attached to the ceiling-mount screw holes of the ceiling
mount acts as an insulator between the ceiling mount and the ceiling
structure. If the ceiling structure is made of a metallic material,
improper insulation with the camera may cause noise interference in
the images. To prevent this from occurring, ensure proper insulation
during installation.
19
EN
Advertisement
Table of Contents
