Setting Up The Camera Using Rm-P2580; Setup Procedure - JVC LWT0254-001B-H Instructions Manual

Setting Up the Camera Using RM-P2580

Setup Procedure

MENU button
SET button
POWER lamp
CAMERA POSITION
SETUP POWER
ALARM
MENU SET
KEY LOCK
LENS CAMERA/POSITION
1 2 3
CAMERA
SPEED
4 5 6
CLOSE IRIS OPEN OPTION OPTION
1
FOCUS
7 8 9
AUTO
NEAR FAR
AF
PAN PATROL
0
WIDE ZOOM TELE CLEAR ENTER
/HOME
cursor
SETUP
POSITION SETUP. .
CAMERA. .
CONTROL UNIT. .
SETUP menu of the remote control unit
Indication of presence of
submenus
MENU
CAM.FUNCTION1..
CAM.FUNCTION2..
CAM.TITLE/ALARM..
CAM.ALC/VIDEO..
AUTO PAN/PATROL/TRACE..
POS.FUNCTION SET..
FACTORY SETTINGS..
< > < >
MENU EXIT SET SUB MENU
MENU screen for the camera
Change mark
CAMERA FUNCTION1
V. PHASE
POS. TITLE LOC.
PRIVATE MASK..
MANUAL DISPLAY
< >
MENU RETURN
Example of a submenu
In systems using an RM-P2580 remote control unit, the menus
Power switch
for use during camera setup can be displayed on the remote
(Rear panel)
control unit. (Please refer to the Instructions for RM-P2580.)
Setting the camera menus from RM-P2580
REMOTE CONTROL UNIT RM-P2580
Set the Power switch on the rear panel of the RM-P2580 to
AUTO F-1 F-2 F-3
ON.
PAN/TILT
Press and hold the MENU button for 3 seconds.
POSI-
TION
2
AUTO
Move the PAN lever downward to move the cursor (E) to
PAN lever
Press the SET button.
Tilt the PAN lever up or down to select an item.
Tilt the PAN lever to the left or right to change the value of
the item.
Upon changing the set value of items, a change mark (*) will appear as
indicated in the left diagram. Please refer to the following pages for
details on setting of the sub-menu.
Press the MENU button.
After completing the setup of the menu items, press the MENU button to
return to the previous menu screen.
● To prevent malfunction of the camera, do not perform menu operation until
initialization of the camera has completed.
- - -
UP-L
ON
●The POWER lamp lights up.
●The LED of the MENU button lights up.
●The SETUP menu of the remote control unit is displayed on the
monitor connected to MONITOR OUTPUT 1.
CAMERA.. in the menu.
●Tilting the lever upward (J) moves the cursor upward.
●Tilting the lever downward (K) moves the cursor downward.
●The MENU screen for the camera is displayed.
●Items followed by .. have further submenus.
●Tilting the lever toward the left (H) decreases the value.
●Tilting the lever toward the right (I) increases the value.
21
EN