Table of Contents
Advertisement
NOTICE
DO NOT use cockpit table as a cutting board.
The knife will leave gouges/marks in the
surface of the table.
Figure Q4: Cockpit Table
Q - 5 FLEXITEEK
An available option is a flexiteek swim platform and
forward deck. See Figure Q5. Flexiteek is made up
of a composite PVC based material with a surprising
similarity and look to that of real teak. Flexiteek can
be cleaned with mild dishwashing detergent. Please
contact your Four Winns dealer for further details.
Flexiteek
Figure Q5: Flexiteek Swim Platform & Forward Deck
Woodwork and Composites - Section Q
Q - 6 ACRYLIC PLASTIC - (Plexiglass)
Acrylic plastic is utilized in most walk-thru doors,
windscreens, transom doors, portlight windows,
electrical panel doors and certain glove boxes.
See Figure Q6.
To clean acrylic plastic:
1. Rinse with plenty of water to wash off as much dirt
as possible.
2. Using your bare hand, along with plenty of water,
feel and remove any dried-on dirt or mud.
3. Wash using a soft, grit-free cloth or sponge and
mild, nonabrasive soap or detergent.
4. Rinse thoroughly with water.
5. Blot dry using a clean, damp chamois.
Never use a dry cloth, duster, glass cleaning
solutions or citrus cleaner on acrylic plastic.
Do not use solvents such as acetone, silicone
spray, benzine, carbon tetrachloride, fire ex-
tinguisher fluid, dry cleaning fluid, lacquer
thinner or ammonia. These solutions damage
the acrylic surface.
You can use fine automotive acrylic rubbing and
polishing compounds to remove fine scratches
Flexiteek
on acrylic. Always read the label before using any
product.
Figure Q6: Clear Acrylic Transom Door
NOTICE
NOTICE
Owner's Manual Page 122
Advertisement
Table of Contents
