Four winns SL Series Owner's Manual page 135

Figure S6: 5-Wire Plug Harness
For maintenance and other information, refer to the
manufacturer's literature included with in the owner's
packet.
E. Winch
Winch operating instructions are listed below.
To release the winch, place the ratchet in the REVERSE
or NEUTRAL position. The winch handle may spin when
pulling on the winch line.
To prevent personal injury, observe the follow­
ing:
A spinning winch handle can cause injury. Be
sure the area is clear.
DO NOT release the handle when the ratchet
is disengaged. Be sure the ratchet is engaged
or no load is on the winch before releasing the
handle.
To prevent personal injury, ALWAYS inspect
the winch line and hook before each use.
NEVER use line that is worn or frayed. NEV­
ER let anyone stand in or behind a boat while
pulling with the winch.
To rewind the winch, ALWAYS engage the ratchet first.
Turn the handle in the appropriate direction to rewind
the line.
Trailer Information - Section S
A clicking sound will be heard when the winch is
properly engaged. If a clicking sound is not heard,
DO NOT release the handle. Handle may spin
backwards. Lower the load into a safe position
before releasing the handle.
Refer to the manufacturer's literature, included in the
owner's packet, for more information on winch opera­
tion.
F. Tires & Wheels
Trailer wheel rims are available in three types of finishes:
white, aluminum and galvanized. The white, powder coat
finish is standard. Aluminum rims (Mags) are optional on
painted trailers. Galvanized trailers are equipped with
matching galvanized rims. Spare tire covers are available
as an option and will match the trailer.
The tires installed on Four Winns® trailers meet the trailer
load requirements for each model. Before trailering,
make sure the tires are inflated according to the man­
ufacturer's recommendation. Tire pressure information
is noted on the tire and in the manufacturer's literature
included in the owner's packet.
Mag wheels include a locking­type nut to help deter theft.
This nut requires a special key or socket to remove. The
socket will be included with your trailer when mag wheels
are ordered. Refer to Figure S7.
Figure S7: Mag Wheel & Mag Wheel Key (Socket)
Owner's Manual Page 132