Table of Contents
Advertisement
Moisture, dirt, chemicals from industrial fallout, heat,
ultraviolet rays and in some cases, salt water are
factors which affect the longevity of acrylic covers.
See Figure O11.
1. Moisture can cause shrinkage and mildew. Allow
the cover to dry thor ough ly before disassembling
tops. Keep it clean and well ventilated to prevent
mildew. Spraying the weather cover with Lysol
Disinfec tant™ or simi lar product will help pre vent
mildew.
2. Dirt creates a starting point for mildew when
moisture is present. Clean the top with a sponge
or soft scrub brush and mild detergent when the
cover is installed. Make sure cover is taut to help
prevent shrinkage.
3. Chemicals cause decay if allowed to accumu late
for long periods of time. Keep the cover clean to
prevent decay.
4. Heat can cause cracks in vinyl components and
stiffening of fabric when enclosed in plastic or
polyethylene. DO NOT store the weather cover
in polyethylene under direct sunlight or high
tempera ture situations.
5. Ultraviolet degradation may occur under pro longed
exposure to direct sunlight. Store the top in the
boot when not in use.
6. Salt water can corrode brass, aluminum, or
stainless steel fittings and fasteners. Keep fittings
clean, lubricated, and waxed to prevent corrosion.
Clear vinyl curtains and windows demand extra care
to prevent scratching. DO NOT use cloth or chamois
skin. Dirt or grit in the cloth will scratch the vinyl win-
dow. Hose clean water onto vinyl to rinse off salt,
dirt, or grime.
NOTICE
DO NOT use hot water. DO NOT dry in an
auto matic dryer. DO NOT dry clean or steam
press.
Leakage after cleaning may be the result of insuffi-
cient rinsing. Re-rinse. If leakage continues, apply
a coat of silicone air drying water repellent, such
as Scotchguard
™
. See your Four Winns dealer for
addition al informa tion on weather covers.
Weather Covers - Section O
Owner's Manual Page 115
Advertisement
Table of Contents
