Brother HL-5130 Service Manual page 41

CHAPTER 2 INSTALLATION AND BASIC OPERATION
For Windows
For Windows
printer port.
For Windows
(1) Click Start, and then Printers and Faxes.
(2) Select the icon of the appropriate printer.
(3) From the File menu, select Set as Default printer.
For Windows
For network users (for HL-5170DN only)
• For connecting the printer to a network, it is recommended to contact the system
administrator prior to installation.
• For the administrator: Configure the printer referring to the following instructions.
• For installing the driver on the PC, refer to the following instructions once the administrator
has configured the printer.
1. For the administrator
Install the BRAdmin Professional Utility (Windows Users Only)
The BRAdmin Professional software utility is designed to manage your Brother network
connected devices such as network-ready printers and/or network-ready Multifunction devices
in a Local Area Network (LAN) environment.
BRAdmin Professional can also be used to manage devices of other manufacturers whose
products support SNMP (Simple Network Management Protocol).
For more information on BRAdmin Professional, go to
(1) Insert the CD-ROM into your CD-ROM drive. The opening screen will appear
automatically. Follow the on-screen instruction.
(2) Click the Install Software icon on the menu screen.
(3) Follow the instructions on the screen. Click BRAdmin Professional.
®
98/Me users: The setup is now complete.
®
2000/XP users: Follow the instructions below for setting the PC
®
2000/XP users only
®
2000/XP users: The setup is now complete.
Fig. 2-7
http://solutions.brother.com
2-8