Printing On Both Sides Of The Paper (Automatic Duplex Printing) - Brother HL-5130 Service Manual

4.8 Printing on both sides of the paper (automatic duplex printing) : For HL-5150D
and HL-5170DN
<Guidelines for automatic duplex printing>
*Use A4, Letter or Legal size plain paper.
*If paper is curled, straighten it and then put it back in the paper tray.
*You should use regular paper. Do not use bond paper or thin paper if possible.
*When you use the duplex printing function, the printing quality becomes worse or paper jam
may occur under some circumstances.
(1) Load paper into the paper tray or MP tray.
(2) Make sure the lever on the Duplex tray is set for the proper paper size. (Letter or Legal size/
A4 size)
(3) Open the Properties dialog box in the printer driver. In the Advanced tab select Duplex
Printing mode, check Duplex, and make sure that Use Duplex tray has been selected.
Select Duplex Type and Binding Offset if you need, and then click the OK button. The
printer will print on both sides of the paper automatically.
HL-5130/5140/5150D/5170DN SERVICE MANUAL
2-27