Nvram Default Value - Brother HL-5130 Service Manual

CHAPTER 7 SOFTWARE SERVICE SUPPORT
4.

NVRAM DEFAULT VALUE

The default values for the main items to be set in NVRAM are as follows;
Items
Timing of Drum LED ON
Development switching
timing
Fixing temperature
Smaller size mode
Descriptions
18,000 pages
(Counted from the drum unit life.)
The developing bias is switched from 400V to 300V when
7,000 pages are printed.
It is switched to 400V again when the toner cartridge is
replaced following the LED error message.
Toner LED: ON, Status LED: ON (Red)
(Counted from the number of the drum rotation in non-
continuous printing)
• Transparencies: 170°C
• Thin paper: 195°C
• Plain paper: 213°C
• Thick paper: 220°C
• Thicker/Bond paper: 220°C (in non-continuous printing)
See 3.7 'PRINT SPEEDS WITH VARIOUS SETTINGS' in
Chapter 1.
7-14