Olivetti d-COLOR MF752 Quick Assist Manual page 68

3
6
To specify the width of the frame to be erased individually, tap [Individual] to select a side, then specify
the width using [+] and [-].
% When specifying the erase width individually, you can set to exclude a side from erasing by selecting
the side and canceling the setting of [Erase] for that side.
7
Tap [OK].
8
Press Start to start scanning of the original.
% Press Preview before Start to check the finishing on the Touch Panel. For the procedure for check-
ing the finishing, refer to the User's Guide DVD.
3-18
Q10. Can I scan the original with its headers and punch holes erased? 3.10
d-Color MF752/652