Olivetti d-COLOR MF752 Quick Assist Manual page 120

5
Operation procedure
1
Load the original.
2
Tap [Copy].
3
Tap [Finishing] and configure the respective items for finishing.
Settings
[Group/Sort]
[Offset]
[Staple/Punch]
4
Tap [OK].
5
Press Start to start copying of the original.
5-22
Q12. Can I perform copying with stapling or punching?
[Group]
[Sort]
[Staple]
[Punch]
[Position Setting]
Description
Enables outputs of more than one copy for each page.
Enables outputs of more than one copy for each set.
When the check box is selected, this setting ejects
paper by offsetting each set of copies for obvious iso-
lation.
Specify how to staple
Specify whether or not to create punch holes.
Select a desired staple or hole-punch position.
Specify [Auto], and the staple and punch positions are
automatically set according to the loading direction of
the original.
5.12
d-Color MF752/652