Daikin Super Multi Plus E-Series Service Manual page 326

Service Check Function
314
Normal status
Enters inspection mode from normal
status when the INSPECTION/TEST
button is pressed.
1. Press INSPECTION/TEST button.
If no button is pressed
for 1 minute, equipment
returns to normal status
returns to normal status.
When MODE selector
button is pressed or no
button is pressed for1
minute, equipment
returns to normal status.
If no button is pressed for
1 minute, equipment
returns to normal status.
5 Press MODE selector button.
SiEN18-622
3
Press
MODE
selector
button.
(S2005)
Troubleshooting