SiEN18-622
2.2.10 MOLD PROOF Operation
MOLD PROOF operation is a function which reduces the spread of mold
by using Fan mode to lower the humidity inside the indoor unit.
To set MOLD PROOF operation
1. Press and hold the MOLD PROOF button
To cancel MOLD PROOF operation
2. Press and hold the "MOLD PROOF
NOTE
•
MOLD PROOF operation will operate for approximately one hour after dry or cooling mode is turned off.
•
This function is not designed to remove existing dust or mold.
•
MOLD PROOF operation is not available when the unit is turned off using the OFF TIMER.
System Configuration
for two seconds.
•
"
" is displayed on the LCD.
button" for two seconds one more time.
•
"
" disappears from the LCD.
Instruction
ECONO
ON/OFF
TEMP
POWERFUL
MODE
FAN
SWING
SILENT
MOLD PROOF
SENSOR
ON
CANCEL
OFF
TIMER
1,2
223