Daikin Super Multi Plus E-Series Service Manual page 280

Ceiling Mounted Cassette Type
1. What to do before operation
This operation manual is for the system with standard control.
Before initiating operation, contact your Daikin dealer for the
operation that corresponds to your system.
NOTE
• If the unit you purchased is controlled by a infrared
remote control, also refer to the infrared remote
control's operation manual.
If your installation has a customized control system, ask your
Daikin dealer for operation that corresponds to your system.
• Heat pump type
This system provides cooling, heating, automatic,
program dry, and fan operation modes.
• Cooling only type
This system provides cooling, program dry, and fan
operation modes.
268
Precautions for group control system or two remote
control control system
This system provides two other control systems beside
individual control (one remote control controls one indoor unit)
system. Confirm the following if your unit is of the following
control sytem type.
• Group control system
One remote control controls up to 16 indoor units.
All indoor units are equally set.
• Two remote controls control system
Two remote controls control one indoor unit (In case of
group control sytem, one group of indoor units)
The unit is individually operated.
NOTE
• Contact your Daikin dealer in case of changing the
combination or setting of group control and two remote
controls control sytem.
Names and functions of parts
Refer to figure 2 on page [1])
a Indoor unit
b Remote control
c Inlet air
d Discharged air
e Air outlet
f Air flow flap (at air outlet)
g Refrigerant piping, connection electric wire
h Drain pipe
Air inlet
j
The built-in air filter removes dust and dirt.
Drain pumping out device (built-in)
j
Condensate removed from the room during cooling.
SiEN18-622
System Configuration