Daikin Super Multi Plus E-Series Service Manual page 228

Instruction
FVXS 35/50 B
You can adjust the air flow direction to increase your comfort.
To adjust the horizontal blade (flap)
1. Press "SWING button
2. When the flap has reached the desired
To adjust the vertical blades (louvers)
Hold the knob and move the louver.
(You will find a knob on the left-side and the right-
side blades.)
Notes on flap and louvers angle.
• Unless [SWING] is selected, you should set the flap at a near-
horizontal angle in HEAT mode and at an upward position in COOL or
DRY mode to obtain the best performance.
ATTENTION
• When adjusting the flap by hand, turn off the unit, and use the remote
control to restart the unit.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is
rotating at a high speed.
216
• " " is displayed on the LCD.
position, press "SWING button" once
more.
• The display will go blank.
• The flap will stop moving.
".
HOME LEAVE
POWERFUL
MODE
SILENT
ON
OFF
COOL/DRY
HEAT
SiEN18-622
O N
C
ON/OFF
TEMP
FAN SWING
CANCEL
TIMER
System Configuration
1, 2