Daikin Super Multi Plus E-Series Service Manual page 173

Field Setting
Push the SET button and match with the LEDs No. 1 - 15, push the RETURN button, and
confirm the data for each setting.
H Data such as addresses and number of units is expressed as binary numbers; the two
ways of expressing are as follows:
H See the preceding page for a list of data, etc. for No. 0 - 25.
160
The No. 1 cool/heat unified address is expressed as a binary
9 797997 number consisting of the lower 6 digits. (0 - 63)
16 4 1
32 8 2
In
16 + 4 + 2 = 22 (base 10 number). In other words, the address is
22.
977 7979
The number of terminal blocks for No. 12 and 13 is expressed as
64 16
an 8-digit binary number, which is the combination of four upper,
No.12
128 32
and four lower digits for No. 12 and 13 respectively. (0 - 128)
977 7997
In
4 1 0110, and the combination of the two is 01010110 (binary
No.13
8 2
number), which translates to 64 + 16 + 4 + 2 = 86 (base 10
number). In other words, the number of terminal block is 86.
the address is 010110 (binary number), which translates to
the address for No. 12 is 0101, the address for No. 13 is
SiEN18-622
Test Operation