Table of Contents
Advertisement
PC-D320/PC-D340/FAX-L400 Chapter 4: Maintenance and Service
"PRINTER DATA ERROR"
Cause:
Abnormality has occurred in the data transmission between the mashine and
computer.
Solution: Use Status Monitor to delete the current print job or the final print job (If more
than one jobs are being printed). Then you can shift to the next job.
If you use PRINTER RESET of the Additional Functions, all the print jobs are
deleted.
"RECEIVED IN MEMORY"
Cause:
(1) The fax unit has run out of recording paper.
(2) The toner supply of the toner cartridge is exhausted.
(3) The output tray is full of paper.
Solution: (1) Supply paper to the paper cassettes.
(2) Change the toner cartridge.
(3) pick up the printed pages onthetray.
"REC. PAPER JAM"
Cause:
Recording paper jam.
This is displayed when the sensor detects a paper jam.
Solution: (1) Recover paper jam.
(2) Check the connection between the ECNT board (J211) and Page top sensor.
(3) Check the connection between the ECNT board (J210) and Paper eject
sensor.
(4) Check the connection between the ECNT board (J204) and Paper pick-up
solenoid.
(5) Check the connection between the ECNT board (J401) and Main motor.
(6) Replace the sensors, solenoid and main motor.
(7) Replace the ECNT board.
(8) Replace the SCNT board.
"START AGAIN"
Cause:
An error due to system malfunction or line breakdown.
Solution: Carry out the same operation again.
"STOP KEY PRESSED / PRESS OK KEY"
Cause:
You have pressed the Stop / Reset button to cancel the current transaction.
Solution: No need.
4-13
Hide quick links:
Advertisement
Table of Contents
