Canon PC-D320 Service Manual page 70

PC-D320/PC-D340/FAX-L400 Chapter 3: Assembly and Disassembly
(15)Remove the retaining ring (h), and detach the bushing.
(16) Remove the gear (i), and detach the bushing.
(17) Remove the separation roller ass'y while shifting it to the front and the rear.
(18) Remove the claw of the separation guide unit, and detach the separation guide unit
while rotating it up. Care should be taken not to lose the detached spring.
(19) Remove the gear (j), and detach the bushing.
(20) Remove the gear (k), and detach the bushing.
(21) Remove the retaining ring (l), and detach the document feed roller by shifting the
shaft. Care should be taken not to lose the detached pin.
Separation roller ass'y
Document
feed roller
k
Pin
Shaft
Claw
l
Spring
Bushing
i
Bushing
Figure 3-10 Document Feed Section 9
Separation
guide unit
3-10
h
Bushing
Bushing
j