Table of Contents
Advertisement
PC-D320/PC-D340/FAX-L400 Chapter 4: Maintenance and Service
#5 TYPE (TYPE setting)
The type setting makes the service data conform to a specific country communications
standards.
#6 SCANNER (SCANNER function setting)
These setting items are for scanned image processing such as edge enhancement and error
diffusion processing.
#7 PRINTER (PRINTER function settings)
These setting items are for basic printer service functions such as the reception picture
reduction conditions. Also there is an item for resetting the printer section without
switching the power off-on.
#8 PDL (PDL settings)
Do not use.
#9 COUNTER (Counter indication)
Use it to check estimates for maintenance/parts replacement.
#10 REPORT (Report output)
Use it to output reports on various service data.
#11 DOWNLOAD (Download)
Do not use.
#12 CLEAR (data initialization mode)
Various data are initialized by selecting one of these setting items. There is
a setting item for checking/inputting the total number of pages printed and total number of
pages scanned by this fax.
#13 ROM (ROM management)
ROM data such as the version number and checksum are displayed.
#14 CS SET (CS unit position)
Use it to change the Contact sensor unit back to its position at time of shipment.
4-43
Hide quick links:
Advertisement
Table of Contents
