PC-D320/PC-D340/FAX-L400 Chapter 3: Assembly and Disassembly
(9) Disconnect the connectors (J504, J505, J506, J509, and J516) on the SCNT board, and
detach the cable from the clamp.
(10) Remove the 4 screws (h), and detach the flat bed ass'y.
(11) Remove the screw (i), and detach the operation panel under cover.
Flat bed ass'y
h
Rear side
h
i
Opration panel under cover
Figure 3-15 Recording Section 5
3-13