Table of Contents
Advertisement
5.6 New SSSWs/Parameters Added to this Model
#1 SSSW
SW01 (service soft switch 01: error management )
Bit
Function
0
Service error code
1
Error dump list
2
Enter password at confidential
Rx image data transfer
3
Copy function
4 (New) ##300 series service error code
5
Not used
6
Date & Time setting restriction
7
User setting restriction
[Bit 4]
When "Output" is selected, ##300 series Service error codes are displayed and in reports.
When "Not output" is selected, no Service error codes are displayed.
SW28 (service soft switch 28: V.8/V.34 protocol settings)
Bit
Function
0 (New) Caller V.8 protocol
1 (New) Called party V.8 protocol
2 (New) Caller V.8 protocol late start
3 (New) Called party V.8 protocol late start
4 (New) V.34 reception fallback
5 (New) V.34 transmission fallback
6
Not used
7
Not used
[Bit 0]
Select whether to use the V.8 protocol when calling. If "NO" is selected, the V.8 protocol
is inhibited at calling and the V.21 protocol is used.
[Bit 1]
Select whether to use the V.8 protocol when called. If "NO" is selected, the V.8 protocol
is inhibited when called and the V.21 protocol is used.
PC-D320/PC-D340/FAX-L400 Chapter 4: Maintenance and Service
4-53
1
0
Output
Not output
Output
Not output
No
Yes
No
Yes
Output
Not output
Setting restricted Setting possible
Setting possible Setting restricted
1
0
No
Yes
No
Yes
No
Yes
No
Yes
Prohibited
Not prohibited
Prohibited
Not prohibited
Hide quick links:
Advertisement
Table of Contents
