Replacing The Separating Knife - Roland VersaART RS-640 User Manual

Replacing the Separating Knife

If the separating knife becomes dull, replace it with the included replacement knife.
CAUTION
Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
CAUTION
Never touch the tip of the separating knife with your fingers.
Doing so may result in injury.
1.
Enter the blade replacement mode.

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
REPLACE KNIFE

NOW PROCESSING..
OPEN FRONT
COVER

FINISHED?
2.
Replace the separating knife.

Press .
Press several times.
Press .
Press .
Press .
Press several times.
Press .
The print-head carriage moves to a location where blade replacement is possible, and
then the screen shown in the figure appears.
Open the front cover.
Preparations are complete when this screen appears.
3-4 Replacing Consumable Parts
Remove the separating knife.
Loosen the screw until it slips out.
Grasp the screw portion, and slowly pull it out
in the direction of the arrow. When doing this, do
not pull it back toward you.
Chapter 3 Maintenance and Adjustment 57