Roland VersaART RS-640 User Manual page 109

5-7 If an Error Message Appears
[TEMPERATURE IS TOO LOW **°C ]
The temperature of the location where the machine
is installed has fallen below the ambient temperature
at which the machine can operate.
Operation cannot be continued. Switch off the sub power. The
displayed temperature is the current ambient temperature
of the installation location. Bring the installed location to a
temperature at which operation is possible (15 to 32°C ) and
allow the machine to come to room temperature, then turn
on the power.
[SET HEAD HEIGHT TO xxx]
The height of the print heads is lower than the height
specified on the computer.
This warning indicates that the height of the print heads is
too low for the media thickness specified on the computer.
The heads move to a location where you can operate the
height-adjustment lever. Adjust to the displayed height, then
press .
 P. 67, "Adjusting Head Height to Match Media Thickness"
[WRONG CARTRIDGE]
A cartridge that cannot be used was installed.
Remove the cartridge to clear the error. Use a cartridge of the
specified type.
108 Chapter 5 What to Do If