Roland VersaART RS-640 User Manual page 35

2-2 Loading and Cutting Off Media
 Grasp the location shown in the fi gure and align the left edge of the media with the mark.
If the media is moved too far to the right, grasp the right media holder at its outer side and shift it to the left.
CAUTION

Secure the media holders in place.
Tighten the retaining screws securely.
34 Chapter 2 Operation
Never attempt this operation while holding any location other than the one speci-
fi ed.
The media may fall from the media holder, resulting in injury.
Grip the
outer side.
Never attempt to move while holding the inner side of the media
holder.
The media may fall and cause injury.
Mark
Grip the
outer side.