Roland VersaART RS-640 User Manual page 54

4.
Reattach the side cover and the maintenance cover and quit the manual-cleaning mode.


CLEANING...
>>
CLOSE MAINTE-
NANCE COVER

Maintenance
cover
Screw

MAINTENANCE
CLEANING

SETUP SHEET
5.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results.
Perform cleaning using the machine's cleaning feature several times when necessary.
 P. 41, "Printing Tests and Cleaning"
Screws
Side cover
Hook
Close the front cover.
Press .
The print-head carriage moves to the right side of the machine, and then the screen
shown in the figure appears.
Make sure that the movement of the print-head carriage has stopped completely.
Screw
Close the front cover.
Press .
Press to go back to the original screen.
3-3 Cleaning the Heads Using the Cleaning Kit
Attach the side cover.
Open the front cover and attach the
maintenance cover.
Chapter 3 Maintenance and Adjustment 53