Magnetic Stripe Cleaning Card; Duplex/Laminator Cleaning Card; Cleaning Pen; Heated Roller Cleaning Stick - DataCard magna User Manual

Magnetic stripe cleaning card

Use the magnetic stripe cleaning card if the printer has a magnetic stripe module. The
card is part number 590408-002. Do not use more than once every 2000 cards.

Duplex/laminator cleaning card

Use the duplex/laminator cleaning card if the printer has automatic two-sided printing
(duplex module) or an optional topcoat or overlay (laminator) module. The duplex/
laminator cleaning card number is 557668-001.
The automatic cleaning function uses cleaning tape. You set how often the automatic
cleaning function runs in the printer driver. The printer also runs the automatic
cleaning function each time you turn the printer power. If you use the default value
(after every 20 cards) and keep the printer running, you use one roll of cleaning tape
for every 1300 cards you print.

Cleaning pen

To maintain print quality and prolong the life of the printhead and other parts, use a
cleaning pen. The cleaning pen is part number 557492-001. Each pen can be used up
to eight times.

Heated roller cleaning stick

To correct quality problems with topcoat or laminate applied to cards, use the heated
roller cleaning stick. The cleaning stick is part number 548369-001. The cleaning stick
is reusable.
User's Guide for Magna™ Platinum Series™ Printers
Figure B-8: Magnetic stripe cleaning card
Figure B-9: Duplex/laminator cleaning card
B-11