Toshiba Equium 5160D Series Preliminary Maintenance Manual page 144

Table D-7 Model 6200D PCI Configuration Error Messages (2/2)
Error Message
NVRAM Cleared By Jumper
NVRAM Data Invalid, NVRAM
Cleared
Static Device Resource Conflict
PCI Error Log is Full
Floppy Disk Controller Resource
Conflict
Primary IDE Controller Resource
Conflict
Secondary IDE Controller Resource
Conflict
Parallel Port Resource Conflict
Serial Port 1 Resource Conflict
Serial Port 2 Resource Conflict
The following PCI messages are chained together to give an error message.
Table D-81 Model 6200D Chained PCI Error Messages
Error Message
PCI resource name Conflict: Bus:
aa, Device bb, Function: cc
where:
PCI I/O Port Conflict:
PCI Memory Conflict:
PCI IRQ Conflict:
Bus: aa
Device: bb
Function: cc
TM
Equium Series Maintenance Manual------------------------------------------------------------ E-6
Explanation
The "Clear CMOS" jumper has been moved to the "CLR"
position and CMOS RAM has been cleared.
Invalid entry in the ESCD.
A non Plug and Play ISA card has requested a resource that
is already in use.
If and when more than 15 PCI conflict errors are detected the
log full message is displayed. If this message displays, no
additional PCI errors can be logged.
The floppy disk controller has requested a resource that is
already in use.
The primary IDE controller has requested a resource that is
already in use.
The secondary IDE controller has requested a resource that
is already in use.
The parallel port has requested a resource that is already in
use.
Serial port 1 has requested a resource that is already in use.
Serial port 2 has requested a resource that is already in use.
Explanation
A PCI resource conflict has been detected. The full message
Is formed by chaining the fixed text with the variable text
indicated by italics. Each message variation provides details
on the type of resource conflict, and detailed information on
the bus, device, and function associated with the resource
conflict.
Two devices requested the same I/O port, resulting in a
conflict.
Two devices requested the same memory address, resulting in
a conflict.
Two devices requested the same IRQ address, resulting in a
conflict.
Is a hexadecimal number corresponding to the PCI bus
number. For desktop system boards, the bus number is 00.
Is a hexadecimal number corresponding to the PCI device.
Is a hexadecimal number corresponding to the active PCI
function within a device.