Toshiba Equium 5160D Series Preliminary Maintenance Manual page 85

Replacing the Fan
To replace the fan, perform the following procedure and see Figure 4-31.
1. Align the pin holes in the fan's casing with the pin holes in the rear of the chassis.
2. Insert the four retaining pins into the corresponding holes (through the rear of the
chassis).
3. Push the pins in, locking the fan to the chassis.
4. Replace the computer's cover. (Refer to section 4.2.2.)
5. Connect the power cord and all external cables to the computer and turn on the power.
Keyboard
This section covers the removal and replacement of the keyboard.
Removing the Keyboard
To remove the keyboard, turn off power to the computer and disconnect the keyboard cable
connector from the keyboard port in the rear of the computer. See Figure 4-32.
Figure 4-32 Removing and Replacing the Keyboard
Equium™ Series Maintenance Manual --------------------------------------------------------- 4-41
Figure 4-31 Removing and Replacing the Fan