Toshiba Equium 5160D Series Preliminary Maintenance Manual page 49

After removing screws, make sure to store them in a safe place and to identify
them with the corresponding parts.
After you have replaced an FRU, make sure the computer is functioning properly
by performing the appropriate test on the FRU you have fixed or replaced.
Cables and Connectors
The Equium™ uses various types of cables and connectors for internal operation. Equium™
cables and connectors include:
Power cables
Data cables
Audio cable
Switch, LED, and fan cables
Normal pin and latch connectors
Connecting and Disconnecting Power Cables
Power cables are groups of cables that connect the power supply to various components and
to the system board. The Equium™ has three power cables that connect to the system board
and five power cables that connect to components or that are unused. Power cables to the
system board use latch connectors while power cables to components use normal pin
connectors. See Figure 4-2.
Equium™ Series Maintenance Manual ----------------------------------------------------------- 4-5
Figure 4-2 Power Cable and Connector