Fiat Bravo User Manual page 89

Problem
After receiving, answering and
ending a second call, the multifunction
display shows INCOMING CALL
PRIVATE NUMBER, instead of the
phone number corresponding to the
first call
®
Models: Nokia 6600
Sometimes when trying to use this phone
with Blue&Me™ Nav, using the
button, the message SEARCHING
CONNECTION is displayed before
the connection is implemented
®
Models: Nokia 6600
No ring tone is produced when receiving
a second incoming call
®
Models: Nokia 6820
ß
Pressing /MAIN for over 1 second to
reject a second incoming call, disconnects
also the current phone conversation
®
Models: Nokia 6820
When answering an incoming call using
the mobile phone keypad, sometimes the
mobile phone disconnects from
Blue&Me™ Nav and the phone
conversationhas to be continued on the
mobile phone instead of the hands-free
feature
®
Models: Nokia 7610
88 88
Probable Cause
In this specific case, the system is not
able to identify which phone call is
ended
The connection between this mobile
ß
/MAIN
phone and Blue&Me™ Nav some-
times may deactivate
On this mobile phone the ring tone of
the second incoming call is very low
This behavior depends on the specific
features of this mobile phone
For certain software versions of this
mobile phone, answering a call using
the keypad will automatically
disconnect the mobile phone from the
hands-free kit
Possible Solution
–
Wait for connection.
To prevent recurring of this problem,
reset the mobile phone by turning it
off and on again
The ring tone of the second incoming
call will always be lower than
normal. Try to turn up the ring tone
volume
–
Answer the incoming call by pressing
ß
/MAIN