Fiat Bravo User Manual page 80

Problem
Display screen shows: PAIRING FAILED
Or the system says "Bluetooth pairing
timed out. Please try again later."
Display screen shows:
INCOMING CALL PRIVATE
NUMBER
Display screen shows: FUNCTION
ENABLED ONLY WHEN VEHICLE
STATIONARY
Or the system says:
"This function is only available
when the vehicle is stationary"
Probable Cause
After three minutes, each attempt to
enter the PIN number fails since
pairing timed out
❒ The caller is not recognized as a
name stored in the phonebook,
and the paired mobile phone does
not have a called ID feature
❒ The caller has blocked caller ID
to prevent the system from
displaying the caller's name
and/or phone number
Even occasional short viewings of the
car display may be hazardous if your
attention has been diverted away from
your driving tasks. Certain Blue&Me™
Nav functions, which require the user
to give attention to the car display, are
only available when the car is stopped
Possible Solution
Retry the pairing procedure. During the
PIN entering step, verify that the PIN
number you are entering on the mobile
phone is the same number that is shown
on the instrument panel display
SETTING FUNCTIONS -
PAIRING YOUR MOBILE PHONE
Enter a contact in your mobile
phonebook for the incoming call,
and then download your phonebook/
contact again
In this case, nothing can be done and
the message will always appear
Stop your car and attempt to perform
the function again manually,
or continue driving and perform the
function using the voice recognition
system
79 79