Using The Phone During The Updating Procedure; Resuming The Update - Fiat Bravo User Manual

Using the phone during the
updating procedure
During the updating procedure it is how-
ever possible to make or answer a call.
Blue&Me™ Nav will pause the updating
procedure and resume it at the end of the
phone conversation automatically.
To make or answer a call during the up-
dating procedure using manual interaction,
refer to sections MAKING A PHONE
CALL and INCOMING CALLS.
The updating procedure will be paused au-
tomatically.
Ending the phone call will resume the up-
dating procedure automatically.
56 56

Resuming the update

If the updating procedure is paused using
the settings menu option, the updating pro-
cedure shall be then resumed manually.
To resume the updating procedure using
manual interaction, proceed as follows:
❒ Your mobile phone shall be paired with
Blue&Me™ Nav.
❒ Press
ß
/MAIN and move to SET-
TINGS, RESUME UPDATE (this
menu option is available only if update
has been previously paused). Press
ß
SRC/OK or /MAIN.
❒ Blue&Me™ Nav will display the mes-
sage RESUME UPDATE and say
"Update. On completion, a mes-
sage will appear".
If the updating procedure was paused be-
cause the ignition key has been turned to
"STOP", the updating procedure will be
resumed automatically.
Notes
❒ Updates will be resumed automatical-
ly only if using the same mobile phone
used for starting the updating proce-
dure.
❒ Blue&Me™ Nav will pause automati-
cally the updating procedure if the paired
mobile phone is no longer available, or
if updating is paused by the Service Cen-
tre, if communication is stopped (e.g.:
tunnels), or if the system slows down
too much its working
Blue&Me™ Nav will try to resume up-
dating at preset time intervals. Should
it be not possible to resume updating
while driving, updating will be resumed
at next engine starting.
❒ If you encounter difficulties with
any of these operations, consult
section HANDS-FREE KIT - TROU-
BLESHOOT-ING.
speed.