Fiat Bravo User Manual page 23

Or, using voice interaction:
}
Assume you would like to call the
contact "John" in your mobile
phone phonebook.
Press and pronounce "Call John"
or "Call John (on/at) Mobile" (in
the previous statement, the key-
word "Mobile" represents the type
of phone number you would like to
call. The phone number type can ei-
ther be "(at) Home", "(at)
Work", or "(on/at) Other").
If the name is recognized, the sys-
tem will display the recognized con-
tact's information (John, in the ex-
ample) on the display screen.
If John has just one phone number,
the system will ask if you would like
to call John. To start the call say
"Yes", otherwise say "No".
If John has several phone numbers,
the system will ask which phone
number you would like to call (e.g.:
"Call John (at) Work or (at)
Home?"). Answer with the type of
required phone number (e.g.: "(at)
Home").
22 22
If John has several phone numbers
but the "location" (i.e.: the type of
phone number like work, home,
etc.) is missing, the system will dis-
play the selected contact and a list
of related phone numbers.
To call the displayed phone number,
pronounce "Call".
If the contact is correct but the
phone number is wrong, you can
surf the phone number list manual-
ly by pressing N or O. When you
find the required number, press
ß
/MAIN or SRC/OK to start the
call.
To end the phone call, press
ß
/MAIN for longer than 1 second.
Practical hint
When you call a contact with multiple
phone numbers, use the "at location" por-
tion of the voice command (e.g.: "(at)
Home", "(at) Work", "(on/at) Mo-
bile"). This will shorten the amount of
steps required to make the phone call.
Dialling a phone number using
voice commands
}
To dial a phone number using voice
interaction, proceed as follows:
Press and pronounce "Dial".
The system will respond with
"Number, please".
Pronounce the phone number as a
sequence of single digits (e.g.: "0",
"1", "2", "3", "4", "5", "6", "7", "8",
"9", "+" (plus), "#" (pound) or "*"
(star).
For example, 0113290103 has to be
pronounced as: "zero, one, one,
three, two, nine, zero, one, zero,
three".
The system will repeat the complete
phone number and display it.
If the number is complete, pro-
nounce "Dial". If you have not fin-
ished speaking the phone number,
then pronounce the remaining dig-
its and then pronounce "Dial".