Points Of Interest - Fiat Bravo User Manual

After entering the destination Road/Street,
Blue&Me™ Nav will ask you if you wish
to enter a house number or navigate to-
wards the address currently set. The avail-
able options are:
❒ ENTER NUMBER
❒ START NAVIGATION
?
Using manual interaction:
Select the required option using the "N"
or "O" keys and press SRC/OK or
ß
/MAIN to confirm.
}
Or using voice interaction, say "En-
ter number" or "Start".
If you choose Start navigation, the sys-
tem will display the full address and ask
you to confirm in order to begin naviga-
tion. If the address entered is ambiguous,
the system will prompt you to choose be-
tween the possible alternatives.
If you choose Enter number, you must
enter the house number of the chosen
destination address.
?
Proceed as follows to enter the
house number:
Scroll through the numbers in the fourth
row (see fig. 4) using the "N" or "O"
keys until the required numbers are dis-
played on the third row. Press SRC/OK
ß
or /MAIN to select the number. Pro-
ceed in the same way to select the fol-
lowing numbers until the full house num-
ber is displayed in the second row.
Press the "N" key to delete the last num-
ber entered. The system will ask you to
confirm the deletion by pressing SRC/OK
ß
or /MAIN. If you are using voice inter-
action, press and say "Delete".
Press the "O" key once to finish enter-
ing the house number displayed. The sys-
tem will ask you to confirm by pressing
ß
SRC/OK or /MAIN. If you are using
voice interaction, press ' and say "OK".
Once you have entered the house num-
ber Blue&Me™ Nav will display the full
address and ask for confirmation in order
to begin navigation. If the address entered
is ambiguous, the system will prompt you
to choose between the possible alterna-
tives.
Note
While entering the house number, both
numbers and letters are shown on the
fourth row (see fig. 4) of the reconfig-
urable multifunction display; in the event
of future map software updates, these will
allow you to set particular types of num-
bering that require the use of alphanu-
merical characters.

Points of interest

This function gives you access to a file con-
taining information on the location of use-
ful destinations of general interest divided
by category (e.g.: hotels, restaurants,
chemists, airports, railway stations, au-
thorised workshops etc.).
To use this function, your USB device with
the preloaded map software must be con-
nected to the USB port on the car.
?
To select a Point of interest using
manual interaction:
Activate the main Menu, select the
NAVIGATION option and then
ß
press SRC/OK or /MAIN.
Select the option NEW DESTI-
NATION by pressing SRC/OK or
ß
/MAIN.
Select POINTS OF INTEREST
ß
and press SRC/OK or
confirm.
/MAIN to
41