Pausing The Update - Fiat Bravo User Manual

In certain cases, Blue&Me™ Nav
could display the following message:
"Update temporarily suspend-
ed. System update will continue
the next time you start the ve-
hicle.". In other cases, during the up-
dating procedure, the system may
prompt to turn the ignition key to
"STOP" and then to "MAR".
When updating is over and available,
Blue&Me™ Nav will display the
message UPDATE COMPLETE
and say: "Update completed".
Or, using voice interaction:
}
Check for proper pairing between
your mobile phone
Blue&Me™ Nav and proper con-
figuration for data transmission.
Press and pronounce "Settings",
"Update".
Blue&Me™ Nav will show the
message UPDATE, will say "Up-
date" and then it starts the updat-
ing procedure.
If no update is available, Blue&Me™
Nav will display NO UPDATE
AVAILABLE and say "No update
available.". Otherwise Blue&Me™
Nav will complete the updating pro-
cedure.
In certain cases, Blue&Me™ Nav
could say "Update temporarily
suspended. System update will
continue the next time you start
the vehicle". In other cases, during
the updating procedure, the system
may prompt to turn the ignition key
to "STOP" and then to "MAR".
When updating is over and available,
Blue&Me™ Nav will display the
and
message UPDATE COMPLETE
and say "Update completed".

Pausing the update

?
To pause updating using manual in-
teraction, proceed as follows:
During updating, select SET-
TINGS, PAUSE UPDATE. Then
select it with button SRC/OK or
ß
/MAIN. Blue&Me™ Nav will
display the message UPDATE
PAUSED and say "Update
paused".
Or,
❒ Turn the ignition key to STOP.
55 55