Advanced Options; Accessing The Device Id; Changing The Gprs Code - Fiat Bravo User Manual

ADVANCED OPTIONS

?
To navigate to the ADVANCED
OPTIONS, menu using manual in-
teraction, proceed as follows:
ß
Press /MAIN to open the Main
Menu then select SETTINGS by
pressing SRC/OK or
Select ADVANCED OPTIONS
and then press SRC/OK or
ß
/MAIN.
Or, using voice interaction:
}
Press , pronounce "Settings" and
then "Advanced Options".
Within the ADVANCED OP-
TIONS menu you can access the
SYSTEM CODE.
Note
This code is an 8-digit number (device ID)
which uniquely identifies the Blue&Me™
Nav system installed on your car and can-
not be changed.

Accessing the device ID

For certain operations, it might be neces-
sary to know the Blue&Me™ Nav system
code.
?
To access the system code by man-
ual interaction, proceed as follows:
ß
/MAIN.
Select SYSTEM CODE and then
press SRC/OK or
The instrument panel display will
show your Blue&Me™ Nav sys-
tem code.
Press SRC/OK or
&
/ESC to quit.
Or, using voice interaction:
}
Press , pronounce "Settings",
wait shortly for feedback and then
pronounce "Device ID".
The instrument panel display will
show your Blue&Me™ Nav sys-
tem code.
Press SRC/OK or
&
/ESC to quit.

Changing the GPRS code

If your mobile phone carrier requires to
change the GPRS code, you can perform
this operation via the ADVANCED OP-
TIONS menu.
?
To change the GPRS code using
manual interaction, proceed as fol-
lows:
ß
/MAIN.
Go to the GPRS CODE menu and
press SRC/OK or
The display will show GPRS:, and a
list of digits (1, 2, 3, 4, 5, 6, 7, 8, 9),
DEFAULT, and DISABLE. To
ß
/MAIN or
select the new GPRS code, press N
and O until choosing the required
option, then press SRC/OK or
ß
/MAIN. To store the default val-
ue, select DEFAULT. To disable
the connection code, select DIS-
ABLE.
After setting the new GPRS code,
Blue&Me™ Nav will display the
message GPRS CODE.
ß
/MAIN or
ß
/MAIN.
57 57