Fiat Bravo User Manual page 24

The system will start the call to the
displayed phone number.
To end the phone call, press
ß
/MAIN for longer than 1 second.
You can pronounce the sequence of
phone number digits in "digit
groups" which allows you to verify
the recognized number in several
small portions. Digit groups are cre-
ated by the pauses you use while
pronouncing the sequence of digits.
If you pause after pronouncing sev-
eral digits, a digit group is created.
The system will repeat the recog-
nized digits.
If the spoken digits are correct, you
can continue pronouncing the phone
number. If the spoken digits are in-
correct, you can delete the digit
group by pronouncing "Delete".
The system will delete the last group
of numbers and display the partially-
dialled phone number. Then, you can
re-pronounce the digit group and al-
so the remaining phone number dig-
its.
To cancel the phone call, pronounce
"Cancel".
To cancel the phone call and start
dialling again, pronounce "Start
over".
To ask the system to repeat the
recognized phone number, pro-
nounce "Repeat". If no phone
number was dialled, the system says
"No number available".
If the repeated phone number is
correct, pronounce "Dial" to start
the call.
Note
When dialling a phone number by voice
commands, it is essential to minimize
background noise in the car and to ask the
other passengers to keep silent while you
are speaking digits. Since the system is of
the speaker independent type it can rec-
ognize also other voices; there is there-
fore the risk that some numbers are ac-
cidentally recognized, added to correct
numbers or not recognized.
Dialling a phone number using
the mobile phone keypad
?
Alternatively, you can dial a phone
number using your mobile phone
keypad and then continue your con-
versation using the hands-free
phone system.
It is a requirement that you create
a pairing relationship and that the
mobile phone is within range of the
hands-free phone system of your
car.
To dial a phone number using your
mobile phone keypad, proceed as
follows:
❒ Dial the phone number on your
mobile phone keypad and con-
nect the phone call following the
procedure required by your mo-
bile phone.
❒ Conduct the conversation using
the hands-free phone system.
❒ To end the phone call, press
ß
/MAIN for longer than 1 sec-
ond, or end the phone call from
your mobile phone keypad.
23 23