Bernina artista 200 Owner's Workbook page 81

M
ASTERING
Y
OUR
BERNINA
®
• Insert Wing needle.
• Engage the Security Program, selecting the Wing needle. This alters the stitch width so that the
"wings" of the needle will not hit the stitch plate; also constrains stitches to the center needle position.
• Position the lace on top of the organdy, centered.
• Select pin stitch #720 and stitch along one edge of the lace. Select stitch #754 and sew along the
remaining edge.
• Carefully trim fabric from under the lace.
• "Frame" lace insertion with three additional hemstitches:
- first row, stitch #726
- second row, stitch #701
- third row, stitch #732
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
WINGING IT ONCE
Fabric: Cotton Organdy, 6" x 6" square
6" length of heirloom lace insertion
Needles: Wing, size 100/16
Thread: Embroidery thread
Presser Foot: Reverse Pattern #1C or
Open Embroidery #20C
®
8/15/02
BERNINA
S E
ECTION
®
artista 200
artista 200/81