Bernina artista 200 Owner's Workbook page 137

M
ASTERING
Y
OUR
BERNINA
®
Mapping the Monogram:
• Using the templates in the back of the instruction manual, trace monograms onto tracing paper in a
pleasing formation.
• Mark the beginning of each letter with "o" and the end with "+".
• Place the transparent compass over the first letter, positioning the center of the presser foot on the
marked ending point (+).
• Note the direction of the arrow leading to the beginning of the next letter (o).
• Count the number of arrows between the two letters. Each arrow represents one 9mm unit of
directional movement. This appears as one stitch pattern in Combi Mode.
Combining the Stitches:
• Access Combi Mode.
• Select and combine the desired letters from the Monogram alphabet using size 1 (30mm letters).
• Access the 16-Directional stitch folder.
• Select stitch #39 and position the cursor below each letter, inserting the appropriate number of
directional stitch units as calculated with the compass template.
• Save the combination in an available File Drawer.
Stitching the Monograms:
• Position the fabric under the needle and place the Sideways Motion Foot #40C on the machine.
• Place the stabilizer under the fabric.
• Stitch the monograms.
• Clip the connecting threads after all the stitching is complete.
• Trim and mount sample on a separate page.
BERNINA
M Y
ASTERING OUR
STITCHING DIRECTIONAL
MONOGRAM COMBINATIONS
Fabric:
Stabilizer:
Needle:
Thread:
Presser Foot:
®
8/15/02
BERNINA
Firm, woven fabric, 8" x 8"
1 piece heavy tear-away, 8" x 8"
90/14 Embroidery
Embroidery
Sideways Motion Foot #40C
S I
ECTION
®
artista 200
artista 200/137