Bernina artista 200 Owner's Workbook page 46

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Fold the fabric in half to 3" x 9".
• Insert the stabilizer between the fabric layers.
• Mark four lines on the fabric where each of the four buttonholes will be sewn.
Temporary Buttonhole Memory
• Select Buttonhole #51.
• Open the Direct Entry screen by touching the Length/On-Screen measurement symbol.
• Use one of the external knobs to adjust the buttonhole length to the desired measurement.
The buttonhole size is shown on-screen in millimeters (mm). Touch OK.
• Sew the buttonhole on the first line.
• Sew the programmed buttonhole again on the second line.
• The artista 200 will remember this buttonhole length until a new measurement is programmed
or the artista 200 is turned off.
Long Term Buttonhole Memory
• Select Buttonhole #63.
• Open the Direct Entry/Buttonhole Measuring screen by touching the Length/On-Screen symbol.
• Measure the button, or simply input a length by turning one of the external knobs.
• The length is shown on-screen. Touch OK and stitch the buttonhole on the third line.
• To save the buttonhole in Long Term Memory, touch the displayed buttonhole in the Stitch Altering Area.
A dialog box displays several options; select "Save Settings". The buttonhole is now saved.
• Turn the artista 200 off, then on again.
• Select Buttonhole #63. Notice the Length On-Screen symbol has a buttonhole length indicated (the
saved length). Select the symbol and confirm the length by touching OK; "auto" appears on the screen.
• Sew Buttonhole #63 on the fourth line.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
BUTTONHOLE MEMORY
Fabric: Heavy woven, 6" x 9"
Stabilizer: 1 piece, 3" x 9"
Needle: 90/14 Embroidery
Thread: 30 weight cotton embroidery
Presser Foot: Automatic Buttonhole Foot with Slide #3A
®
8/15/02
BERNINA
S C
ECTION
®
artista 200
artista 200/46